Description
Today anti-jamming solutions become critical for the various applications. Unmanned vehicles, automated robotic platforms, time synchronization systems, various special and military vehicles have been endangered the impossibility of receiving GNSS signals. Rapid development of jammers along with industrial noise forced to make increased demands for the interference immunity for reliable functioning. It concerns both, the design of the new products and the modernization of existing by replacing antenna to anti-jam CRPA.
The Anti-Jamming GNSS receiver, together with a phased array antenna (NTL-AJA1s or NTL-AJA1), implements the Null-Steering algorithm, creating dynamic nulls in the antenna gain pattern to the direction of jammers. The system provides significant jamming protection even in dynamic multi-jammer scenarios both under narrowband and broadband interferences. Anti-jamming GNSS receivers are designated for the navigation data (positioning, velocity, time) determination using GNSS signals (GPS, GLONASS, Galileo, BeiDou)1 in the L1, L2, L5, E1BC, E5a, E5b, B1, B2 bands1 under intentional and unintentional interferences.
TECHNICAL APPLICATIONS
- UAV
- On-ground vehicles
- Automated robotic platforms
- High-dynamics in severe environments
- Railway transport
- Critical infrastructures such as airport, port, power stations and ect.
TECHNICAL SPECIFICATIONS
| GNSS | GPS L1(C/A), GLONASS L1(C/A) | ||
| Single jammer interference resistance | up to 90 dB (J/S) | ||
| Multiply jammers interference resistance | up to 82 dB (J/S) | ||
| Positioning accuracy (RMS) | |||
| Horizontal | 2.1 m | ||
| Vertical | 3.8 m | ||
| Data interface | RS422 x 2, USB x 12, Ethernet x 12 | ||
| Data protocols | NMEA, NTL binary | ||
| 4 RF output | GPS L1 (C/A), GLONASS L1 (C/A) | ||
| Operation conditions: | |||
| Altitude | 18000 m | ||
| Velocity | 512 m/s | ||
| Electrical parameters | |||
| Supply voltage | 12…36 V DC, 24 V typical | ||
| Power consumption | |||
| Option 1 | <8 W (All data interfaces and up-converter) | ||
| Option 23 | <6 W (All data interfaces without up-converter) | ||
| Option 33 | <5.5 W (RS422x1 only without up-converter) | ||
| Weight and size | |||
| Dimensions of receiver (L х W х H) | 229 mm х 167 mm x 42 mm | ||
| Weight of receiver | 1500 g | ||
| Dimensions of antenna NTL-AJA1 (Ø х H) | 227 x 37 mm | ||
| Weight of antenna NTL-AJA1 | 1180 g (1560 g with cables) | ||
| Dimensions of antenna NTL-AJA1s (Ø х H) | 140 x 24.5 mm | ||
| Weight of antenna NTL-AJA1s | 394 g | ||
| Protection | IP67 | ||
1The basic option GPS L1(C/A), GLONASS L1(C/A). Additional variants of the GNSS constellations and frequency bands upon request.
2Hardware ready only.
3Assembly option on request.
The actual product may differ in appearance
Related Documents
Related Products
