1-TO-5 RF SPLITTER SPL15

• 1 RF input with antenna supply capability (5V)
• 5 RF outputs
• 5V power supply connector

 

SPL15 description

 

GET QUOTE

 

Category: Tag:

Description

SPL15 is 1-to-5 active splitter with L1, L2, L3, L5, S subbands RF preselection. It is intended to
be used with navigational receivers if active antenna (cable losses included) will be plugged in.
SPL15 provides less than 2dB of noise figure and more than 35dB out of band RF rejection.
Every channel can be independently assembled to pass through one of available GNSS bands.
SPL15 is optimal to be paired with NT1065, NT1066 or NT1068 (coming soon) evaluation
boards

Package content

• 1-to-5 RF splitter
• Power supply cable
• 5 SMA-to-SMA RF cables

Related Products

NT1065_USB3 RF IC EVALUATION KIT

NT1065_USB3 is an evaluation platform for performance and capabilities demonstration of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. It includes USB3 data converter thus allowing an user to process captured satellite signals on a PC. Data rate is configurable and may be as high as 800 Mbps (200 Mbps per channel)

NT1065_USB description

 

GET QUOTE

NT1065_FMC2 RF IC EVALUATION KIT

NT1065_FMC2 is a FPGA Mezzanine Card intended to demonstrate performance and capabilities of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/ QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. All outputs and controls are routed to FMC connector, which allows to mount FPGA Mezzanine Card to any compatible FPGA to build your system prototype with the platform you got used to work with.

NT1065_FMC description

 

GET QUOTE

NT1065_EVK2 RF IC EVALUATION KIT

NT1065_EVK2 is an evaluation platform for performance and capabilities demonstration of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. It is suitable the most for in-lab examining with measurement equipment like spectrum analyzer, oscilloscope, network analyzer and etc, but also it has connectors for wiring to external development platforms.

NT1065_EVK description

 

GET QUOTE

1066-evk-v22NT1066_EVK_v0.22

NT1066_EVK RF IC EVALUATION KIT

NT1066 EVK is intended for prototyping of navigation receivers based on NT1066: 4-Channel RF FrontEnd IC (3 wideband IQ and 1 narrowband IQ) that covers all GNSS (GLONASS, GPS, Galileo, BeiDou, QZSS, NavIC) signals at all frequency bands (L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 and S) and can be ‘on a fly’ software-reconfigured to receive real-time corrections data transmitted over FM, VHF and UHF bands. NT1066_EVK can be also used as evaluation platform for performance and capabilities demonstration of NT1066.

 

NT1066_EVK description

 

GET QUOTE

 

GNSS Surveying Antenna HX-CSX608A

GNSS Surveying Antenna HX-CSX608A

  • The antenna part adopts the multi-feed design scheme to realize the coincidence of the phase center and the geometric center to minimize the influence of the antenna on the surveying deviation.
  • The high gain of antenna element and wide beam width provide the effect of receiving a signal with a low elevation angle, and can still receive the satellite normally in some cases with serious occlusion.
  • It can effectively reduce the influence of multipath on the surveying accuracy.
  • Waterproof and anti UV covers, increasing the reliability for long term field work of antennas.

GET QUOTE