SINGLE BAND 4-CHANNEL OEM GNSS KIT

  • Separate units: Single band ОЕМ antenna array and Single bаnd 4-channel ОЕМ GNSS Module
  • Operational in GPS&GLONASS simultaneously
  • Accurate positioning in standalone mode and GPS+SBAS mode
  • Increasing the reliability of receiving open GNSS signals due to 4x redundancy
  • Fast automatic replacement of failed elements of the main equipment
  • Low probability of failure in the operation of the entire system as a whole
  • Easy to integrate

GET QUOTE

 

 

Category:

Description

Single band 4-channel ОЕМ GNSS Kit is device system designed for continuous reception of open GNSS signals and increasing the reliability due to 4x redundancy, which is carried out by simultaneous reception of open GNSS signals by four omnidirectional antennas.

 

TECHNICAL SPECIFICATIONS

 

 

Supported GNSS constellations GPS L1 (C/A), GLONASS L1 (C/A), SBAS L1
Frequency band L1
Number of receiver channels1 4
Positioning accuracy (RMS)2
Horizontal 2.1 m
Vertical 3.8 m
Data interface3 2xRS422
Peripheral interfaces 4x1PPS out
Data protocols NMEA, NTL binary
Module Power supply 12V…50V, 24V typical
Power consumption: < 8.0 W
Module Dimensions 170mm х 157,8mm x 24.2mm
Module Weight ~175 g
Operation conditions:
Altitude up to 18000 m
Velocity up to 515 m/s
Acceleration up to 4 g
Jerk up to 1 g/s
Operating temperature – 40°C …+ 65°C
Antenna Gain 24 dB
VSWR <2
Antenna Power supply 3.3V … 5V
Antenna Dimensions (Ø х H) 120mm х 21,4mm
Antenna Weight ~105 g

1Used 4-channel L1 band RF FE IC

2Depends on atmospheric conditions, satellite visibility and geometry, multipath conditions.

3Ethernet optional