Showing all 6 results

1062-evk evaluation ic kit

NT1062_EVK RF IC EVALUATION KIT

NT1062 EVK is an evaluation platform for performance and capabilities demonstration of NT1062: Two-Channel RF Front-End IC that covers GNSS (NavIC, GLONASS, GPS, Galileo, BeiDou, QZSS) signals at all frequency bands in various combinations: L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3. External active antenna can be connected to SMA input that is common for two receiving channels. As an option two separate SMA inputs can be used for operating with external passive antennas. NT1062 EVK is suitable the most for in-lab examining with measurement equipment like spectrum analyzer, oscilloscope, network analyzer and etc, but also it has connectors for wiring to external development platforms and can be used for prototyping of navigation receivers based on NT1062.

 

NT1062_EVK description

 

GET QUOTE

 

NT1065_EVK2 RF IC EVALUATION KIT

NT1065_EVK2 is an evaluation platform for performance and capabilities demonstration of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. It is suitable the most for in-lab examining with measurement equipment like spectrum analyzer, oscilloscope, network analyzer and etc, but also it has connectors for wiring to external development platforms.

NT1065_EVK description

 

GET QUOTE

NT1065_FMC2 RF IC EVALUATION KIT

NT1065_FMC2 is a FPGA Mezzanine Card intended to demonstrate performance and capabilities of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/ QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. All outputs and controls are routed to FMC connector, which allows to mount FPGA Mezzanine Card to any compatible FPGA to build your system prototype with the platform you got used to work with.

NT1065_FMC description

 

GET QUOTE

NT1065_USB3 RF IC EVALUATION KIT

NT1065_USB3 is an evaluation platform for performance and capabilities demonstration of NT1065: 4-channel GPS/GLONASS/Galileo/BeiDou/NavIC/QZSS L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 band RF Front End. It includes USB3 data converter thus allowing an user to process captured satellite signals on a PC. Data rate is configurable and may be as high as 800 Mbps (200 Mbps per channel)

NT1065_USB description

 

GET QUOTE

1066-evk-v22

NT1066_EVK RF IC EVALUATION KIT

NT1066 EVK is intended for prototyping of navigation receivers based on NT1066: 4-Channel RF FrontEnd IC (3 wideband IQ and 1 narrowband IQ) that covers all GNSS (GLONASS, GPS, Galileo, BeiDou, QZSS, NavIC) signals at all frequency bands (L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 and S) and can be ‘on a fly’ software-reconfigured to receive real-time corrections data transmitted over FM, VHF and UHF bands. NT1066_EVK can be also used as evaluation platform for performance and capabilities demonstration of NT1066.

 

NT1066_EVK description

 

GET QUOTE