GNSS Surveying Antenna HX-CSX608A

  • The antenna part adopts the multi-feed design scheme to realize the coincidence of the phase center and the geometric center to minimize the influence of the antenna on the surveying deviation.
  • The high gain of antenna element and wide beam width provide the effect of receiving a signal with a low elevation angle, and can still receive the satellite normally in some cases with serious occlusion.
  • It can effectively reduce the influence of multipath on the surveying accuracy.
  • Waterproof and anti UV covers, increasing the reliability for long term field work of antennas.




For ensuring better positioning performance of GNSS receiver, it is an important to use the correct GNSS antenna.
HX-CSX608A is an antenna for receiving GPS L1/L2/L5, GLONASS L1/L2, BeiDou B1/B2/B3/S-band, Galileo E1/E5a/E5b, NavIC L5/S-band and SBAS signals. This is a compact and versatile antenna that can be used in geodetic surveying, marine surveying, waterway surveying, dredging surveying, seismic monitoring, bridge deformation monitoring, landslide monitoring, dock container operation and other occasions.




Antenna Spec
Frequency Range GPS L1/L2/L5
BeiDou B1/B2/B3/S-band
Galileo E1/E5a/E5b
NavIC L5/S-band
Impedance 50ohm
Polarization RHCP
Axial Ratio ≤3dB
Azimuth Coverage 360°
Output VSWR ≤2.0
Peak Gain 5.5dBi
Phase Center
LNA Spec
LNA Gain 40±2dB
Noise Figure ≤2.0dB
Output VSWR ≤2.0
In-band flatness ±2dB
Operation Voltage 3.3~12VDC
Operation Current ≤65mA
Group Delay ≤5ns
Mechanical Spec
Dimension φ173.4*62.6 mm
Connector TNC Female
Weight ≤550 g
Environment Spec
Operating Temp -40℃~+85℃
Storage Temp -40℃~+85℃
Humidity 45%~95%