NT1066 4-CHANNEL GNSS RF FE IC

  • 4-Channels RF FE IC, 4 PLLs
  • GPS/GLONASS/Galileo/BeiDou/NavIC/QZSS
  • S/L1/L2/L3/L5/E1/E5/E6/B1/B2/B3
  • DGPS signals reception over FM, VHF, UHF bands
  • 12ร—12mm QFN108 package

Status: mass production

Datasheet of NT1066 Compare with other ICs

 

The manufacturing of this IC is available for our customers using a design documentation provided by NTLAB UAB under a license agreement.

 

GET QUOTE

Category: Tag:

Description

NT1066 is a 4-channel RF Front-End IC (3 wideband IQ and 1 narrowband IQ) that covers simultaneously all GNSS (GLONASS, GPS, Galileo, BeiDou, QZSS, NavIC) signals at all frequency bands. It makes possible to benefit from all the advantages of acquiring multiple system simultaneously. Channels โ€œAโ€, โ€œBโ€ and โ€œCโ€ are designed with single conversion low-IF architecture, individually programmable and intended to receive L1, E1, B1, E6, B3, L2, L3, B2, L5, E5 in various combinations. IQ and image suppression modes are available, other options can be discovered in feature list. Channel โ€œDโ€ is dedicated to operate in S band or L2, L3, L5 bands of GNSS and has zero-IF architecture. S and L5 bands combining lets user to eliminate effectively ionospheric distortion utilizing large signal base. As alternative, channel โ€œDโ€ can be โ€˜on a flyโ€™ software-reconfigured to receive real-time corrections data transmitted over FM, VHF and UHF bands.

NT1066 does also integrate 4 fractional-N synthesizers that have the common reference frequency input. Wide list of attractive features and high level of customization make NT1066 capable to meet a demand of researchers and OEM developers in special applications: high precision positioning, goniometric, driverless car systems, professional drones and related areas.

 

Features NT1066 RFIC

Overall:

  • 4 independent, fully customizable IQ-channels
  • 4 fractional-N PLLs with fully integrated VCOs and autotuning system
  • Clock output for correlator with programmable frequency, amplitude and DC level
  • Pass-through TCXO reference signal output
  • Internal or external sampling frequency for 2-bit ADCs
  • 4-wire SPI interface with user friendly registers map
  • Individual status indicators of main subsystems (available in SPI registers) and cumulative status indicator (AOK, available both as a separate pin and in SPI registers)
  • Embedded temperature sensor
  • 12 x 12 mm QFN108 package

Channels โ€œAโ€, โ€œBโ€ and โ€œCโ€ feature list:

  • Single conversion superheterodyne architecture for L1, L2, L3, L5 bands of GNSS signals reception
  • Active antenna detector system including short-protection circuit
  • Tunable signal bandwidth up to 60 MHz (up to 30 MHz of IF BW with autocalibration system)
  • IF AGC system or manually programmable gain
  • Configurable output type: IQ or real with separate upper and lower sideband
  • Analog differential output or 2-bit ADC digital output with programmable output logic high level

Channel โ€œDโ€ feature list:

  • Direct conversion architecture with IQ data output for S band or L2, L3, L5 bands of GNSS signals reception or FM 65โ€ฆ110 MHz, VHF 160โ€ฆ240 MHz, UHF 470โ€ฆ862 MHz bands for DGPS data downloading
  • Tunable signal bandwidth up to 22MHz (up to 11MHz of IF BW)
  • Dual AGC system (RF + IF) or manually programmable gain
  • Wide dynamic range with 1dB compression point up to 0 dBm
  • Analog differential output with programmable thresholds or 2-bit ADC digital output with programmable output logic high level

ย 

Applications NT1066 RFIC

  • GNSS based positioning systems
  • GNSS based goniometric systems
  • In-vehicle navigation systems
  • GNSS based driverless car systems
  • Professional drones

 

Related Products

 

1066-evk-v22

NT1066_EVK RF IC EVALUATION KIT

NT1066 EVK is intended for prototyping of navigation receivers based on NT1066: 4-Channel RF FrontEnd IC (3 wideband IQ and 1 narrowband IQ) that covers all GNSS (GLONASS, GPS, Galileo, BeiDou, QZSS, NavIC) signals at all frequency bands (L1, L2, L3, L5, E1, E5a, E5b, E6, B1, B2, B3 and S) and can be โ€˜on a flyโ€™ software-reconfigured to receive real-time corrections data transmitted over FM, VHF and UHF bands. NT1066_EVK can be also used as evaluation platform for performance and capabilities demonstration of NT1066.

 

NT1066_EVK description

 

GET QUOTE